# UnitTable v1.7.0 — 追加単位の定義 / Added unit definitions

計算用の係数は、以下の定義式からJavaScript Numberで求めます。表示は有効数字設定により丸めます。
Coefficients are computed from the expressions below using JavaScript double precision; output is rounded to the selected significant digits.

## 基準 / Constants

- Standard gravity: g₀ = 9.80665 m/s².
- International pound: 0.45359237 kg.
- International foot: 0.3048 m; international inch: 0.0254 m.
- Thus lbf = 0.45359237 × 9.80665 N.
- Base quantities: power W, torque N·m, pressure Pa, volume m³.

| 単位 / Unit | 基準値への係数 / Factor to base |
|---|---|
| MW | 10⁶ W |
| kW | 1000 W |
| PS, metric horsepower | 75 × 9.80665 W = 735.49875 W |
| hp, mechanical horsepower | 550 × 0.3048 × 0.45359237 × 9.80665 W |
| kgf·m | 9.80665 N·m |
| kgf·cm | 9.80665 × 0.01 N·m |
| lbf·ft | 0.45359237 × 9.80665 × 0.3048 N·m |
| lbf·in | 0.45359237 × 9.80665 × 0.0254 N·m |
| MPa | 10⁶ Pa |
| kPa | 1000 Pa |
| hPa, mbar | 100 Pa |
| bar | 100000 Pa |
| kgf/cm² | 9.80665 / 0.0001 Pa |
| psi | 0.45359237 × 9.80665 / 0.0254² Pa |
| atm | 101325 Pa |
| mmHg, conventional | 13595.1 × 9.80665 × 0.001 Pa = 133.322387415 Pa |
| Torr | 101325 / 760 Pa |
| cup (JP) | 200 × 10⁻⁶ m³ |
| tbsp (JP) | 15 × 10⁻⁶ m³ |
| tsp (JP) | 5 × 10⁻⁶ m³ |

## 前提 / Scope

圧力は単位だけの換算であり、ゲージ圧と絶対圧の切替はしません。電力と機械動力の効率換算、トルクとエネルギーの換算、食材の容量と質量の換算も行いません。
Pressure conversions preserve the reference (gauge or absolute). Motor efficiency, torque-to-energy and ingredient volume-to-mass conversions are outside scope.

mmHgは慣用密度による定義値で、実際の水銀温度による密度変化を計算しません。Torrと厳密には異なります。
mmHg uses conventional mercury density; temperature-dependent physical mercury columns are not modeled. It is not exactly equal to Torr.

料理用単位は日本の容量定義。海外の同名単位や180 mLの米用カップとは区別します。
Cooking measures use Japanese definitions, distinct from overseas measures and the 180 mL rice cup.

## 出典 / Sources

- [NIST SP 811, Appendix B.9: power, moment of force/torque, pressure](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9)
- [NIST SP 811, Appendix B.8: conversion factors and exact definitions](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8)
- [キッコーマン：日本の料理用カップ・大さじ・小さじ / Japanese cooking measures](https://www.kikkoman.co.jp/homecook/quantity.html)

既存の尺貫法はREADMEに記載した1951年の日本の定義によります。
Existing shakkanhō units follow the 1951 Japanese definitions linked in the README.

## SI接頭辞 / SI prefixes

| 記号 / Symbol | 日本語 | English | 倍率 / Factor |
|---|---|---|---|
| Q | クエタ | quetta | 10^30 |
| R | ロナ | ronna | 10^27 |
| Y | ヨタ | yotta | 10^24 |
| Z | ゼタ | zetta | 10^21 |
| E | エクサ | exa | 10^18 |
| P | ペタ | peta | 10^15 |
| T | テラ | tera | 10^12 |
| G | ギガ | giga | 10^9 |
| M | メガ | mega | 10^6 |
| k | キロ | kilo | 10^3 |
| h | ヘクト | hecto | 10^2 |
| da | デカ | deca | 10^1 |
| — | 接頭辞なし | No prefix | 10^0 |
| d | デシ | deci | 10^-1 |
| c | センチ | centi | 10^-2 |
| m | ミリ | milli | 10^-3 |
| μ | マイクロ | micro | 10^-6 |
| n | ナノ | nano | 10^-9 |
| p | ピコ | pico | 10^-12 |
| f | フェムト | femto | 10^-15 |
| a | アト | atto | 10^-18 |
| z | ゼプト | zepto | 10^-21 |
| y | ヨクト | yocto | 10^-24 |
| r | ロント | ronto | 10^-27 |
| q | クエクト | quecto | 10^-30 |

換算式：出力 = 入力 × 10^(入力側指数 − 出力側指数)。同じ単位に付く接頭辞の換算です。二進接頭辞や面積・体積の二乗・三乗はこの表では自動適用しません。

Formula: output = input × 10^(source exponent − destination exponent), for prefixes attached to the same unit. Binary prefixes and squared/cubed unit factors are not automatically applied.

Source: [BIPM SI prefixes](https://www.bipm.org/en/measurement-units/si-prefixes).
